SPIE Oil & Gas Services is Recruiting – 10 Vacancies Available

SPIE Oil & Gas Services is recruiting to fill the following positions:

1.) Tender Support & Field Engineer (M / F) [click here for details]
2.) Instrument Technician (M /F) [click here for details]
3.) Shutdown Coordinator [click here for details]
4.) Turbine Specialist [click here for details]
5.) Vessel Superindendant [click here for details]
6.) Lifting Superintendant [click here for details]
7.) Heat Exchanger Superintendant [click here for details]
8.) PLC Supervisor [click here for details]
9.) CBM Engineer [click here for details]
10.) PLC / ICSS Engineer [click here for details]

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific.

Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams.

Reference: 2020-17569
Location: Lagos
Contract: Permanent Contract
Contractual Hours: Full Time
Employee Status: Employee

Job Description

• He is required in subsequently to lead all PPS Technical Support, Tender Support and Field Engineering execution activities
• Technical Support for Tendering & Bids
• Provide front-line technical solutions during interface with clients
• Design jobs, prepare and coordinate all mobilization, planning and execution
• Manage all assigned projects
• Timely communication of accurate metrics of Field operations progress, milestones, customer service satisfaction and productivity
• Lead project execution
• Training and competency support
• Fully accountable for driving job HSE and Quality delivery.

Profile
Key Requirements:

• Bachelor's Degree in Engineering
• Minimum of 7 years relevant Process and Pipelines Services - Both field and Tendering Support.

Candidate Criteria:

• Minimum level of experience required: 6 years or more
• Languages: English (D-Full professional proficiency)

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference: 2020-17546
Location: Onshore - Port Harcourt, Rivers
Contract: Permanent contract
Contractual hours: Full time
Employee Status: Operative

Job Description

• This position is a unique opportunity to planning and scheduling inspection and maintenance activities of instrument equipment and systems with responsibility for operation of different facilities.

Responsibilities
Your main duties will be:

• Should be experienced in DCS (preferably DeltaV from Emerson), PLC systems, SMART field transmitters from Rosemount and other field instruments such as ultrasonic flow meters, level transmitters, motorized valves, temperature transmitters, vibration monitoring systems and the like.
• Should have experience in computerized maintenance system.
• Experience with SAP system would be an added advantage.
• Should be computer literate and shall have enough skills to understand logic diagrams and complex control loops used in DCS and PLC's.

Profile

• Ideally, you should have completed Diploma in Instrumentation Engineering.
• You should have minimum 5 years working experience in the oil and gas industry or with major utilities.
• You will have good interpersonal and organizational skills, as well as, an advance level of computer literacy and be proficient in Microsoft Office.
• You will need excellent communication and presentation skills in both written and verbal English.

Languages:

• English (C-Professional working proficiency).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference No.: 2020-17489
Location: Lagos
Contract: Freelance contract
Contractual hours: Full time
Contract duration: 2 months

Job Description
Conduct core Shut Down activities through the following:

• Coordinate ALL the preparation activities of the Shut Down as per the approved plan, ensuring
• Material procurement,
• Resources mobilisation,
• Cost follow-up,
• Updated planning,
• Regular liaisons with construction/Maintenance department and site through regular meetings,
• Ensuring proper certifications/authorizations from proper authorities
• Valuation of estimated duration, and estimated costs
• Supervise and coordinate to perform a first screening review and nominate modification leaders.

Conduct core Preparatory activities through the following:

• Coordinate all the preparatory activities related to Operations Shut Down with MTM/INSP/ECP/Site and FM
• Coordinate with the various involved parties (production, inspection, maintenance, etc.) the definition of the Shut Down scope of work to cover:
• Work lists
• Planning and POB
• Impact on production and flaring,
• Budget costs,
• Identification of major resources/means requirements,
• Planning
• Call and lead meetings, request evaluation studies, call for various options of planning etc.

Conduct Reporting activities through the following:

• Follow-up the Shut Down works performance until completion including issuance of a close out report
• Coordinate review meetings and reports on progress, cost evaluation, HSE impact, impact on production, fitness for purpose, planning, compliance with plant design specifications
• Compile synthesis on modifications projects for management reviews
• Ensure update of technical documentation after modification completion
• Ensure strict implementation of Approved Modification Procedure
• Support the organize technical preparation (technical dossiers) and material preparation (logistics - infrastructures) for all the aspects of Shut Down, with the team and the designated correspondents in the entities of the affiliate

Conduct supervisory activities through the following:

• Coach local engineers when required
• Mentor and coach Senior and Junior Preparators
• Manage efforts of Senior and Junior Preparators
• Perform similar duties as required

Profile

• Chartered Engineer (A-levels + 5 years' study) or Higher National Diploma or Certificate (HND / HNC (A-levels + 3 years' study) or BTS/DUT or equivalent,
• 5 to 10 years' experience in the maintenance field on oil and gas production installations,
• Knowledge in Primavera,
• A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations.
• Fully conversant with SAP/R3
• Ability to advise and motivate multi-national teams,
• Pride in his work, ability to maintain good relations with colleagues and others,
• Physical ability to work on offshore installations in the climatic conditions of the site,
• Working language: English, French optional.
• Has the ability to maintain good relations with colleagues and others,
• Perfectly competent and independent in his own field,
• Perfectly competent and independent in his field, he must show common sense and organizational ability.

Candidate criteria:

• Minimum level of experience required: 6 years or more
• Languages: English (D-Full professional proficiency)

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference No: 2020-17495
Location: Offshore location, Nigeria
Contract: International Contract
Contractual hours: Full time
Employee Status: Operative
Position to report to: MTMC Site Rep.
Direct subordinates: 2
Main contractors supervised: none

Job Description
Missions:

• Within the framework of Deep Water Operations, This position is responsible for the operation, monitoring and leading routine and non-routine maintenance of 6 units Rolls Royce gas turbines consist of RB211 24G gas generator and RT 62 power turbine (and the auxiliaries) located within AKPO FPSO OML 130, in a safe and environmentally responsible manner.

Job Dimension:

• Production level: during plateau period = 175 000 bpd, 530 MMSCFD gas
• Company staff managed during operations : none
• Contractors staff managed during operations: 2
• Budget (in Millions USD) : nil
• Technology involved in the job: Gas Turbines, Compressors, Diesel Engines, Static Equipment, other Mechanical items.

Activities
Operations:

• Responsible for the Operation and Maintenance of the Akpo Turbo-generator package
• Organizes on site the maintenance operations which are related to turbo machines and auxiliaries and provide technical support, analysis and troubleshooting.
• Assists the planning team by giving any technical support for the preparation of the jobs in his discipline.
• Contact OEM Technical support for assistance in Turbo-generator package fault resolution and follow up with OEM & Onshore support team in clearing all the issues on the equipment.
• Assists specialists working under Specific Maintenance Contracts (SMC).
• Ensures that the COMPANY’s HSE regulations are respected and enforced (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility.
• Leads interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field,
• Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in training of subordinates
• Carries out, at the MTMC Site Rep. request, any intervention within his field of competence.
• Takes charge of the systems under his responsibility in case of breakdown until operational.

Required Qualifications and Background

• Technical Engineer / Higher National Diploma (HND) or equivalent in Mechanical / Electrical / Instrumentation Engineering with a minimum of 5 to 10 years’ experience in the operation and maintenance of Gas Turbines and auxiliaries in oil and gas production installations or power generation plant
• A thorough, demonstrated understanding of plant operations, strong understanding of Gas Turbine and axial compressor, DCS, ESD, F&G, Field Bus, Field instrumentations, PLC, Bentley Nevada and online condition monitoring system, Mechanics, Hydraulics, Electricity and Electronics.
• Understanding SAP/R3 PM modules as relate to Notification, work orders, PM’s, and spare parts inventories.
• Experience in Troubleshooting, Root Cause Analysis, Health Checks, monitoring, PM and Corrective Maintenance.
• Physical ability to work on offshore installations in the climatic conditions of the site,
• Competent computer skills, especially Microsoft Office products; Excel, and Word.
• Solid knowledge of plant engineering and plant maintenance functions and how they relate to operations.
• Strong oral and written communication skills in English Language.
• Ability to comprehend and apply technical information, including mechanical and electrical drawings (such as blueprints, P&IDs, single-line diagrams and schematics) to problem-solving situations and trouble-shooting.
• Ability to communicate and coordinate work on technical subjects with others across job families and with outside vendors.
• Must have proven ability as a leader of small team. Perfectly competent and independent in his field, he must show common sense and organizational ability.
• A hand on experience on Rolls Royce RB211 24G turbo Gas Turbine is a pre-requisite.

Required Competencies:

• Oil & Gas production process
• Plant Integrity Management System, Codes, Standard
• Condition Monitoring Techniques
• Mechanical Techniques.

Related areas:

• Construction, installation
• Safety of personnel and installations
• Quality Assurance & Control.

Management of personnel:

• Knowledge of Rotating Machinery equipment
• Knowledge of Lifting equipment
• Knowledge of Exchangers, Valves and Piping.

Candidate Criteria:

• Minimum level of experience required: 10 years or more
• Languages: English (C-Professional working proficiency).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference No.: 2020-17494
Location: Offshore, Nigeria
Contract: International Contract
Contractual hours: Full time
Employee Status: Operative

Job Description
As a Shutdown Superintendent for the position of Vessel Superintendant - offshore -, you will also:

• Ensures that the PVV design and related PVV Engineering Deliverables are compliant with General Specifications, applicable platforms/project specifications, applicable international/local Codes & Standards and applicable local regulations.
• Ensures HSEQ compliance by design.
• Ensures that the PVV Engineering Package is fully in accordance with the Scope of Work, free of clashes, consistent and compliant with the quality requirements.
• Ensures that the designed PVV modification involves no HSE risk during site execution, minimum offshore site works and minimum production loss.
• Ensures that design done by VENDOR is in accordance with Technical Requisition.
• Ensures that work is delivered in time in accordance with the planning.
• Ensures that the PVV Design Appraisal Dossier (DAD) is compliant with PED requirements, complete and approved by NoBo for hand over to Construction team.
• Ensures Constructability, Operability and Maintainability of designed PVV modifications
• Contributes to achieve clients and Department HSE objectives. Report anomalies and any HSE events.
• Contributes to the implementation of corrective actions when required / requested.

Profile
Must Have:

• BSc in Mechanical Engineering, or equivalent.
• Experience: Minimum 10 years within the Petroleum Industry
• Excellent knowledge of clients referential, international / local Codes & Standards and local regulations related to PVV discipline and excellent knowledge of Pressure Equipment Directive (PED).
• Pro-active with good organisational skills, team spirit, strong communication skills (verbal & written) and service minded.
• English language is mandatory, both spoken & written.
• Knowledge of AutoCAD, Pack Office and Acrobat.
• Knowledge of Microstation would be an asset.

Candidate criteria:

• Minimum level of experience required: 10 years or more
• Languages: English (E-Native or bilingual proficiency).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference: 2020-17493
Location: Offshore
Contract: International Contract
Contractual hours: Full time
Employee Status: Operative

Job Description

• Ensures HSE values are well understood and are not breached under any circumstance while carrying out offshore construction activities on the FPSO Akpo.
• The Senior Rigger is the designated ‘responsible person’ in overall charge of lifting equipment and operations on the FPSO under ECP scope of work.
• Prepares lifting/rigging plans.
• Prepares the permit to work and getting it approved by Site Lifting Specialist.
• Organizes the day to day lifting and rigging activities offshore in conjunction with ECP construction work leader.
• Compiles and maintains a Rigging Loft register and ensures that equipment is in good conditions.
• Ensures that the level of supervision on site is sufficient to meet project specifications requirements.
• Acts as handling and lifting authority on validation of contractor’s key deliverables and prescribed audits as necessary
• Liaises with Site Lifting Specialist on a day to day basis for all lifting operations.
• Reports any issue to construction work leader and maintains regular and efficient information to him.
• Ensures that activities performed on site in the project perimeter fulfill project HSE requirements.
• Reports any incident as per Company and Project rules.
• Implements with Contractor Site Representative any Risk Assessment of Job Safety Analysis as required by Project HSE procedures.
• Carries out all lifting operations supervision / monitoring activities required for the successful delivery of the Contracts assigned.
• Participates in Job Hazard Analyses and Attends safety toolbox meetings on a daily basis with contractors' work teams.
• Creates work procedures; assesses contractors' personnel and equipment for suitability for the work.
• Carries out any other work of a similar nature as may be requested by DW ECP Management.
• Provides technical input on contractor and consultant selection with handling and lifting content.
• Promotes best practice and use of innovative technology including maintenance of the CMS principles and the LMS.
• Verifies that the lifting equipment satisfies regulatory requirements: Condition / fitness for purpose, SWL and WLL, Serial No.
• Identification Number, Valid certificate, Colour code if applicable.
• Could be required to give assistant to other teams on site outside of the FMC team on technical issue relating to lifting and handling.
• Reports to the Fabric Maintenance Supervisor

Profile
The holder of this position must have the following qualifications:

• B.Sc / B.Eng, or HND in Engineering Discipline or equivalent.
• Advanced rigging and lifting level 2 competences minimum
• At least 5 to 10 years of experience in lifting and rigging operations
• Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
• Ability to work in a large multinational team
• Ability to work independently while maintaining good relations with colleagues and others
• Physical ability to work on offshore installations in the climatic conditions of the site
• Working language: English mandatory, French is an advantage

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Note: SPIE Oil & Gas Services is committed to promote diversity. This position is opened to people with disabilities.

Reference No: 2020-17492
Location: Offshore, Nigeria
Contract: International Contract
Contractual hours: Full time
Employee Status: Operative

Job Description
As a Shutdown Superintendent for the position of Heat Exchanger Superintendant - offshore -, you will also :

• Ensures that the PVV design and related PVV Engineering Deliverables are compliant with General Specifications, applicable platforms/project specifications, applicable international/local Codes & Standards and applicable local regulations.
• Ensures HSEQ compliance by design.
• Ensures that the PVV Engineering Package is fully in accordance with the Scope of Work, free of clashes, consistent and compliant with the quality requirements.
• Ensures that the designed PVV modification involves no HSE risk during site execution, minimum offshore site works and minimum production loss.
• Ensures that design done by VENDOR is in accordance with Technical Requisition.
• Ensures that work is delivered in time in accordance with the planning.
• Ensures that the PVV Design Appraisal Dossier (DAD) is compliant with PED requirements, complete and approved by NoBo for hand over to Construction team.
• Ensures Constructability, Operability and Maintainability of designed PVV modifications
• Contributes to achieve clients and Department HSE objectives. Report anomalies and any HSE events.
• Contributes to the implementation of corrective actions when required / requested.

Profile
Must Have:

• BSc in Mechanical Engineering, or equivalent.
• Experience: Minimum 10 years within the Petroleum Industry
• Excellent knowledge of clients referential, international / local Codes & Standards and local regulations related to PVV discipline and excellent knowledge of Pressure Equipment Directive (PED).
• Pro-active with good organisational skills, team spirit, strong communication skills (verbal & written) and service minded.
• English language is mandatory, both spoken & written.
• Knowledge of AutoCAD, Pack Office and Acrobat.
• Knowledge of Microstation would be an asset

Candidate criteria:

• Minimum level of experience required: 10 years or more
• Languages: English (E-Native or bilingual proficiency)

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference: 2020-17358
Location: Offshore, Nigeria
Job Type: Contract

Description

• We are currently looking for a PLC Superviosr to work in on one of our key projects (FPSO)

Job Dimensions

• Direct responsibility for the maintenance, operation and configuration of the hardware and software of the Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI) and associated devices of all Packages within the AKPO Industrial Information System (SII),
• Partial responsibility for the AKPO Safety Instrumented System,
• Reports to the ICSS Administrator,
• Is assisted by the Triconex Specialist.
• The FPSO produces 160 kbopd of Oil and 600 mmscfd of Gas and has a storage capacity of 2,000,000 barrels.

Job Contents / Problem Solving (Activities):

• HSE Ensure that COMPANY's HSE regulations are respected

Technical:

• Maintain, operate, modify and perform routine tasks on the PLCs, HMIs, automation computers and Unit Control Panels (UCP) of all AKPO Packages located in the Hull and Topside of the FPSO as well as the Buoy, all located within the AKPO Field.
• Carry out modifications on both hardware (input, output, communication cards etc) and software (control and safety logic, sequence logic etc) of all systems (compressors, pumps, oil & gas metering system, High Integrity Pressure Protection System (HIPPS), Tank Gauging System (TGS), Power Distribution Control System (PDCS), Telemetry System, machine monitoring system etc), under his responsibility as may be required, requested or directed by COMPANY.
• Prepare with the ICSS Administrator, preventive and corrective actions and modifications of the systems under his responsibility.
• Manage and document in technical reports, interventions using the CMIMS and work packs provided by the planning team.
• Follow up the parameter values and alarms in the concerned systems under his responsibility and perform trouble shooting if required.
• Control and apply inhibits in the systems as directed and controlled by COMPANY rules and procedures.
• Maintain an accurate and auditable log of all system faults and inhibits (Short term and long term).
• Take part in daily, weekly and coordination meetings on SITE,
• Identify, in the preparatory stage of maintenance works, any sensitive operation and ensure that a proper assessment of the risks involved is carried out beforehand,
• Identify recurrent corrective maintenance interventions, analyse them and suggest improvements, as well as problems related to availability, quality and obsolescence of spare parts.
• Track any backlog of work in area of responsibility and suggest corrective measures to COMPANY and CONTRACTOR to improve the management of the backlog.
• Review and assure that all Software Modifications and corrective actions are validated by COMPANY.

Profile
The holder of this post must have the following qualifications:

• National Diploma or Certificate (ND / NC) or A-levels + 3 years' further study or BTS/DUT or equivalent,
• 6 years' experience in the field of Control and Safety Systems and a minimum of 3 years as a Specialist in Control and Safety systems in the Oil and Gas / Petrochemical industry,
• Knowledge of the oil and gas treatment process, installations and equipment. Advanced knowledge and skill in PLC's especially Siemens' SIMATIC Industrial Automation Systems, Panels and HMI's.
• Knowledge of machine control (e.g compressor control, injection pump control, offloading pump control, turbine control) will be an added advantage.
• Knowledge of general instrumentation concepts, field devices (sensors and final elements), instrument loops, etc.
• Awareness of Emerson's DeltaV Process Control System, Allen Bradley's ControlLogix System and Schneider's Triconex Safety Instrumented Systems are an added advantage.
• Awareness of SAP CMIMS or similar
• Awareness of Operator Training Simulators.
• Possession of good interpersonal skills Fluency in English language is required and knowledge of French language is an advantage
• Manages interventions using the CMIMS and work packs provided by the planning team,
• Reviews all intervention reports in the CMIMS (including those concerning SMC) and writes the detailed technical
• reports related to his field,
• Monitors (and in certain plant – Operates) the functioning of any equipment placed under his responsibility,
• Performs trouble shooting in the ICSS, PLC, etc.
• Follows up the Parameter values and alarms in the concerned systems for condition monitoring purposes,
• Controls and applies inhibits in the systems as directed and controlled by COMPANY rules and procedures.
• Maintains an accurate and auditable log of all system faults and inhibits (Short term and long term)
• Takes part in daily, weekly and coordination meetings on SITE,
• Ensures that the transfer of knowledge by mentoring occurs properly within his teams and actively participates in this
• himself, leading others by his example,
• Manages and Coaches/Mentors the ICSS/PLC technician directly under his responsibility,
• Carries out, at COMPANY Validation, any intervention within his field of competence.
• Takes in charge the systems under his responsibility in case of breakdown until correct operation is resumed.

Candidate Criteria

• Minimum level of experience required: 6 years or more
• Languages: English (D-Full professional proficiency).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference: 2020-16974
Location: Port Harcourt, River (Occasional site visits to sites)
Job type: Fixed-term-contract
Contractual hours: On demand
Contract duration: TBC

Job Description

• SPIE NIGERIA Limited is actively looking for CBM Engineers profiles to join its workforce in Nigeria

Your activities will include:

• Contributes to the building of Methods and Support activities within the Maintenance entity.
• Carries out CBM vibration surveys on site as per planning developed by the CBM Lead and issues reports accordingly
• Follows up with site to ensure that all actions arising from the CBM Surveys are promptly closed
• Carries out Lube Oil sampling as per the planning, performs laboratory analysis of the samples as required and issues reports accordingly.
• Advises site on the outcome of the Lube Oil analysis and the actions required to be carried out to ensure equipment availability.
• Reviews and advises and follows up on the acceptable process for Lube Oil management on site.
• Carries out gas leak investigation / surveys on sites and makes estimates of the leakage rates of valves. Also, develops the action plan to close out the leaks on the concerned valves.
• Participates in RAID meetings with HQ and Smart Room and follows up with TADM’s and site to ensure the closure of the actions arising therefrom.
• Assists in vibration analyses and other analyses including all methods related activites as required by the CBM Lead.
• Is in constant liaison with the Smart Room Engineers, Maintenance disciplines TADM’s and Methods Engineers to follow-up actions with regards to the results of the different CBM measurement campaigns.
• Follows up with site on all the corrective actions recommended following analyses to ensure that they are properly implemented.
• Visits site whenever the need arises and physically assists to carry out specialized activities following from CBM results (balancing, alignment, rotor axial position adjustment, proximiter gaps setting, etc.…)

Accountabilities
Within the framework of JV Assets FOPS, in the field of Maintenance, the main objectives for job holder are to:

• Perform proper works coordination, activities reporting, equipment condition analysis, in view of maintaining and optimizing the operations and the equipment performance.
• Participate in the preparation and reporting for Maintenance entity activities including issuance of dashboards and reports
• Control and administer the technical and administrative documentation within the Maintenance entity including engineering and vendor technical documentation and ensure update of CMIMS, EDMS, and servers.
• Responsible to ensure that the equipment registers are kept up-to-date and that maintenance records are validated at proper level, properly reported, recorded and maintained in the dedicated data bases.
• Ensure that equipment availability and reliability are at their optimum.

Profile
Qualification / Experience Required:

• Education: BSc / BEng in Engineering Vibration ISO Cat II Certification, based on the ISO 18436-3
• Professional experience: 10 years in Oil & Gas environemt
• 5 years experience in Condition Based and Predictive Maintenance
• Experience in maintenance support and especially in field maintenance capacity
• Good knowledge or CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...)
• Good knowledge of planning tools, and of CMIMS tools (preferably SAP based)

Candidate Criteria
Minimum level of experience required

• 6 years or more

Languages:

• English (E-Native or bilingual proficiency)

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Reference number: 2020-17197
Location: Nigeria
Contract: Permanent contract
Contractual hours: On-demand
Employee Status: Employee

Job Description
Software Maintenance:

Provide availability for installations, Analyse and diagnose possible communication problems, Execute the control modifications and/or corrective actions for :

• Alarm labels, wrong animations etc.
• Logic change on special working points.
• Data maintenance and updating available for P.I.
• Scale and threshold check, possible corrective actions.
• Transfer these modifications on offshore sites and update them.
• Analyse and diagnose possible automation working problems.
• Execute program modifications required by TEPNG.
• Realize controller and automaton programs backups.
• Keep up to date DCS documents and diagram.

Material Maintenance:

• Diagnose malfunctions and execute material maintenance.
• Execute preventive maintenance works :
• PC disk and memory free space check.
• Package and system fault logs check.
• PC mouse and keyboard check.
• Ventilation filters and PC/Server de-dusting.
• PLCs batteries follow-up, possible changes.

Organization:

• Take instruction from the maintenance superintendent of TEPNG
• Use the CMMS (SAP) software as his main organisation tool.
• Manage system follow up
• Update the « Assistance sheets requests »..
• Print activity report.
• Involvement in construction works in accordance with maintenance superintendent
• Provide assistance to the operators:
  • Give precise details about pump start-up or valve port conditions
  • Help for diagnosis,
  • Explain DCS functionalities (test report printing, threshold modification, alarm inhibit, etc.).
• Collect operators « feedback » for possible system improvements.
• Assist mainly instrument supervisor in their different maintenance tasks connected with the DCS (scale check, measures etc.)

Materials used on Site:

• SIEMENS Simatic S5
• Triconex
• Les serveurs: CISCO 4000
• Bently Nevada

Profile

• Able to express himself in English recommended French.
• Reliability, with a significant experience to operate oil or gas field.
• Ability to work under pressure and stressing conditions.
• Position holder is located on COBO with 24-hrs duty on a 4 x 4 weeks rotation schedule.
• Needs to maintain good communication with other TEPNG departments, prod & method,
• Ensures safe, efficient and cost-effective operations through proactive management Mtce Contractor.
• Achievement of required maintenance programs.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

(adsbygoogle = window.adsbygoogle || []).push({});